Structural Glass Inspection

There are many positive aspects of using glass as a building material in buildings. However, it is also very important to carry out a manufacturing inspection when building glasses.

Dış ortam ile iç ortam arasındaki görsel iletişimin kurulmasında oldukça etkin olan cam malzemeler ışık geçirgenliği yönünden de işveren isteğine göre güdümlenebilmektedir.

Glass materials, which are very effective in establishing the visual communication between the outside and the inside, can also be guided according to the employer's desire in terms of light transmittance.

Production of building glasses with the most general expression is provided by 5 different processes. Process control in 5 different processes ensures that the products come out of the tapes perfectly.

Final product checks and pre-shipment checks are carried out to detect a possible product defect.

Glass Cutting Process Inspection

The control of the glasses cut from jumbo glasses to the production size is provided in this process. Process specific error determinations are made and activities to improve the quality of glass products are first initiated in this process.

The most common types of errors in glass cutting process inspection are: side breaking, wolf mouth formation, flake waste and deviation from measurement.

Glass Edging Process Inspection

Glass products, whose cutting process is completed, are brought to the edging process to be grinded according to the project details. Glasses are processed to apply the running-in type determined according to the visuality of the project and the use of the glass.

Edging types: Non-processed edge, matt edged edge, sanded edge, glossy edged edge and dimension edged edge. Chamfering operations can be carried out on the edges of the glass by the project specific and employer's demand.

The most common type of error encountered in glass edging process inspection: burrs, insufficient running-in, wrong running-in type application and machine errors.

Temper Glass Process Inspection (Prestressed Glass Inspection)

Temper process is the process of increasing the impact resistance with a certain pre-stress caused by heating the glass products in the furnace. In these types of glass, breaks occur in the form of glass particles that are small, small and uncertain.

Temper process is divided into two in itself. These processes are; It is called full temper and partial temper. The most common errors in temper process control; glass wrecks, breaks, corrugation, surface pinollations, misting.

Laminated Glass Process Inspection

Laminated glasses are safety glasses designed and manufactured to increase the safety of the place. Even if the glass breaks, the protective film (PVB) keeps the glass as a whole and prevents the breakage and spillage in the ordinary glass.

The desire to obtain high-property glass in laminated glasses also causes the protective film (PVB) properties to change. According to customer demand, manufacturing companies can change their protective film (PVB) applications and properties.

The most common errors in laminated glass process inspection are; flowering, boat, glass particle and haze.

Double Glass Process Inspection

The Double Glass process is a process created by combining the products produced in the lower step. Glass products are combined with the help of slat, butyl and silicone. Noble gases can be printed between the glasses, depending on the customer demand and the project. The noble gas pressure between the glasses increases the glass insulation to the upper levels.

The most common errors in double glass process inspection are; The continuity of the errors coming from the past process, the traces caused by the technical properties of the washing water, coating problems, glass - lath problems, the problem of not enough gas being pressed, the problem of not using suitable silicone, the silicone mixing ratio problem, butyl non-sticking - butyl overflow problem, skidding etc. are problems like.

The Heat Soak process and shipment shipments, which are outside these processes, are also very important.

In order to avoid problems at the construction sites, the desired product can come in the desired box and provide the necessary qualities, which can be the product of a proper inspection mechanism.